LED Zone Controller 0-10V Installation Guide
© 2017 EnOcean GmbH V2.0
Page 1
Package Contents
Tools Required
n
LED Zone Controller
n
Screwdriver
n
Wire nuts
Product Description
The LED zone controller (LEDD) uses wireless technology to
communicate with other self-powered EnOcean based
products and provides an amazingly simple solution for
dimming control of LED lighting.
LEDD is directly supplied from the auxiliary 12V supply
output of a connected LED driver. Its compact size enables
flexible installation inside of or next to electrical boxes and
fixtures so it can be easily wired out of sight using standard
wiring practices.
Simply link the module to an EnOcean-based motion sensor,
light level sensor or rocker switch and experience levels of
efficiency and convenience that can only be achieved
through wireless controls.
It is also possible to link LEDD to a central controller or via a
gateway to building automation systems like BACnet.
Product Features Include:
n
Enables wireless dimming of a single fixture or a zone of
multiple daisy chained LED fixtures (e.g. 20 each 30W or
10 each 60W).
n
Supports California Title 24 daylight harvesting scenarios,
occupancy control and manual dimming with input from
self-powered wireless switches and sensors. Implements
load shedding initiated by separate Demand Response
Controllers
n
Installs inside or mounts to electrical box using threaded
connector
n
Supports wireless remote commissioning to link devices
and set parameters
Specifications (typ. values)
Power Supply
11.0 V – 13.2 V DC
Supply Current (typ) 16 mA @12VDC supply (no sourcing)
38 mA @12VDC supply
(10V/20mA sourcing)
Power Consumption < 200 mW @ 12 V DC
(excluding 0-10V sourcing power)
< 460 mW @ 12 V DC
(at maximum 0-10V sourcing power)
0-10V output
Tole3%/-4% (1-10V range)
Current sourcing / sinking 20 mA*
* F
or high sinking current and dim value settings
below 1V, the output voltage may exceed the
selected output value and reach 1V max.
Inputs/Outputs
Flying-lead style wires:
n
2 power input wires
n
2 output wires for 0-10V control
Local User Interface 2 Buttons, 1 LED for device
configuration & manual control
RF Standard
EnOcean 902 MHz (LEDRU)
Transmission Range 80 ft. (25 m)
EnOcean Equipment
Profile
D2-40-00 with RECOM
Compatible with Navigan™
Interoperable
Products / EEPs
(EnOcean
Equipment Profiles)
Rocker Pad Switch (F6-02-02)
Occupancy Sensor (A5-07-01)
Occupancy Sensor (A5-07-02)
Occupancy Sensor (A5-07-03)
Light Level Sensor (A5-06-02)
Light Level Sensor (A6-06-03)
Central Controller (A5-38-08)
Demand Response (A5-37-01)
Dimensions
2.24” H x 1.65” W x 1.2” D
(57mm x 42mm x 30mm)
Weight
2.5oz. (70g)
Mounting
n
Connect to electrical boxes and
fixtures using threaded nipple
n
Install inside standard electrical box
Environment
n
Indoor use only
n
32° to 140° F (0° to 60° C)
n
20% to 95% relative
humidity (non-condensing)
Agency Compliance FCC, IC
UL 2043 plenum rated
