ennoLogic eT1050D, User Manual

Page: 14 / 56

ennoLogic Dual Laser IR Thermometer - User Manual
10
Paper, white 0.68
Plastic 0.84 - 0.95
Quartz Glass 0.93
Rubber, black 0.95
Sand 0.90
Skin, human 0.98
Snow 0.80
Soil 0.92 - 0.95
Steel, oxidized 0.75
Steel, polished 0.07
Tape, electrical, black 0.97
Tile 0.97
Water 0.95 - 0.98
Wood 0.86 - 0.90
Log Feature (LOG)
The thermometer can store up to 20 readings in memory.
This feature is useful when multiple measurements are
taken that need to be recorded for future review.
To store a single reading, first make sure the thermometer
is in HOLD mode (not scanning.) Press the MODE button
multiple times until the LOG symbol appears in the bottom
left corner of the LCD display. Then use the UP and
DOWN buttons to select the memory location (01..20.)
Press the yellow Laser/Backlight button to store the
currently displayed temperature value in the selected
memory location. Pressing it again will clear the location.
Press the UP and DOWN buttons to access additional
memory locations to recall previously stored values or
update them with new values.