ennoLogic eT1050D, User Manual

Page: 11 / 56

ennoLogic Dual Laser IR Thermometer - User Manual
7
MODE Functions
The red MODE button can be used to cycle through a
number of advanced features of the instrument. These
features are explained below. (Please note that mode “Tk”
is not a feature accessible to the user in this model.)
Maximum, Minimum, and Average Temperature (MAX,
MIN, and AVG) and MAX-MIN Difference (dIF)
While the trigger button is held down for scanning the
temperature of various surfaces, the thermometer
continuously tracks and updates the maximum (MAX),
minimum (MIN), and average (AVG) temperatures, as well
as the difference between MAX and MIN (dIF). These
values can be recalled in HOLD mode by pressing the red
MODE button several times, and are retained in memory
until a new measurement is taken.
High and Low Alarms (HAL and LAL)
Two temperature alarm set points can be programmed:
High Alarm (HAL) and Low Alarm (LAL). While
temperatures are being scanned (trigger button held
down), if the temperature is lower than the LAL value or
higher than the HAL value, the instrument will beep. The
alarm set points can be programmed by pressing the
MODE button until HAL or LAL appear on the LCD
display. Use the UP and DOWN buttons to select the
desired temperature for each set point. Holding the UP or