4
www.bullard.com
•
Perform a bump check before each use. Adjust the calibration if
necessary.
•
After airflow is connected, check the 0.01-micron filter for a fault indication. This is displayed by
observing the bubble indicator on the top of the middle valve filter assembly when AirGuard is supplied
with compressor air.
•
Should AirGuard at any time experience severe shock or impact recheck the calibration via a bump check
and adjust if necessary.
•
Always have a trained and qualified person interpret the results to ensure safe operation.
Warning!
California Proposition 65 Warning: Cancer and Reproductive Harm
www.P65Warning.ca.gov
AirGuard Approvals
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use
–
Part 1: General Requirements [UL 61010-1:2012 Ed.3 +R:29Apr2016]
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use
–
Part 1: General Requirements [CSA C22.2#61010-1-12:2012 Ed.3 +U2]
