AirGuard
TM
3
www.bullard.com
Introduction
Thank you for selecting the Bullard AirGuard. The AirGuard is a portable breathing air system which meets NFPA
and OSHA requirements. It uses a three-stage filter system which removes contamination and odors in the
breathing air stream. The AirGuard reports both Carbon Monoxide and differential dew point values on a visible
and externally mounted liquid crystal display. It also has operator warning alarms for flow CFM (cubic foot per
minute) and calibration interval reminders. The AirGuard data log records all operational use and calibration
events for OSHA (Occupational Safety and Health Administration) compliance reporting.
Safety Recommendations
Important Reference Information
Note
= Important information about use of the instrument.
Remarque
= Informations importantes sur l'utilisation de l'instrument.
Caution
= Affects Equipment
–
If not followed may cause damage to the instrument or
sensor.
Attention =
affecte l'équipement - s'il n'est pas suivi, il peut endommager l'instrument
ou le capteur.
Warning
= Affects personal safety
–
If not followed may cause bodily injury or death.
Avertissement =
Affecte sécurité personnelle - non suivi peut causer des blessures
corporelles ou la mort.
General Safe Use Considerations
•
AirGuard is an instrument designed for Grade D breathing air
compliance. It is important that the operator is trained by qualified
personnel to ensure proper use.
•
The AirGuard is approved primarily for indoor locations and limited
outdoor use.
•
Do not use the AirGuard unless you have been trained to operate the
instrument and fully understand its implementation as a health and
safety device. Inappropriate use can result in severe injury or death.
•
Observe Proper Battery Maintenance and use only chargers supplied by
BULLARD to avoid battery damage and performance issues.
•
Do not recharge AirGuard in a hazardous classified or environmental
location.
•
Indoor recharging only.
PROOFING VIEW - SCALE: 2 : 1
LABEL, WARNING / INFO,
AIRGUARD
COMPUTER FILE NO.
04539-261_Label_Warning-Info_AirGuard.idw
DRAWING NO:
04539-261
SHEET:
REV:
OF
2
2
B
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES ON:
2 PLC DEC
±
.03
3 PLC DEC
±
.010
PG SIZE:
SCALE:
DO NOT
SCALE
8.5x11
ENG. APP'L:
DESIGNED BY:
1/3/2020
CREATION DATE:
PJK
NOTES: UNLESS OTHERWISE SPECIFIED:
XXX
