AirGuard
TM
11
www.bullard.com
Compressor Pneumatic Connections
Prepare to connect the air supply from the compressor to the AirGuard inlet located on the left side of the
instrument.
Caution! 150 pounds is the maximum inlet pressure
Attach the pneumatic hose from the compressor to the AirGuard.
To connect to the AirGuard inlet pull the outside ribbed ring away from the end of the compressor hose and push
the connector into the receptacle port. Release the ribbed connector to complete the connection. Make sure the
connection is secure.
Follow the same process in reverse to disconnect the hose.
Inlet Connection