EN
47
Mounting the whisk
Push the connecting adapter for the whisk onto the motor
block so that the arrow on the motor block lies above the
symbol (lock open).
Twist the connecting adapter towards the symbol (lock
closed) and the motor block in the opposite direction until
the connecting adapter audibly clicks into place and is seat-
ed firmly.
Gently push the whisk shaft into the hole on the whisk
adapter until it audibly clicks into place. When doing so, pay
attention to the guide nose that must fit into the opening.
Release the connecting adapter by twisting it toward the
symbol (lock open). Release the whisk from the connecting
adapter by pulling it with sufficient force.
