ENIGMA XM88422 Digital Receiver
Version 1.50
22
Serial Programming
The ENIGMA XM88422 digital receiver can be
programmed through each of its two RS232 serial
ports. The programming can be carried out with the
help of the ENIGMA Programming Software detailed
in the next chapter.
When commencing serial programming, the receiver
will generate a “Program Access” message. If the
time and date is set during programming a
“Time/Date Set” message will be stored, if any
parameter of the receiver is c
hanged a “Program
Change” event will be recorded. Upon termination of
the serial programming a “Program End” event will be
stored in the memory buffer.
User Defined Library
The user definable event library can be programmed
only with the help of the ENIGMA Programmer
Software..
The User Defined Library orders a 14 character
ASCII character string to 1, 2, 3 or 4 digits event
codes. The receiver will automatically substitute
event codes to corresponding ASCII text if found in
the library and displays and prints the events that
way. This allows human readable event printout that
helps the work of the central station operator when
operating the receiver in stand-alone mode.
More about User Defined Libraries can be found in
the ENIGMA Programmer Software manual.
Summary of Contents for XM88422
Page 1: ...User Manual ...
