Thank you for choosing Enigma
To ensure the installation process is simple and efficient,
we recommended you read this guide in full first.
Specific tools are also required to complete the installation:
3
© 2019 by Selo. All rights reserved. Selo reserves the right to alter specification and designs without prior notice.
Laser Level
Pencil
Tape Measure
Knife
Cordless Drill Driver
Powered
Chop Saw
Hex Keys
(Metric)
Cable Stripper
& Cutters
Flathead Screwdrivers
(Medium & Small)
Long-nose
Pliers
——————— Sync Unit Wiring Tools ———————
For Double Doors
Getting started
The Motus Enigma pocket door system will be delivered in three boxes:
1.
Pocket Frame
2.
Trim Surround
3.
Track
If a door leaf has been ordered this will come separately.
Before you start installation ensure you
have read and understood the instructions.
POWER REQUIREMENTS
DELIVERY
The Motus Enigma pocket door system requires a low-voltage electrical
connection. Wiring for the system can vary based on the type of connection:
Hardwired
(Optional)
1.
13 amp fused spur
isolation switch
2.
1.5mm twin and earth cable
feed to the
top of the pocket enclosure
‘Kettle-lead’ Wiring
(Standard)
1.
13 amp
single socket
IMPORTANT SAFETY INFORMATION
The unit should be installed and commissioned by a trained and qualified personnel.
The unit may only be opened and repaired by the manufacturer.
This unit may only be operated from a protective low-voltage with safe electrical isolation.
Always consider the safety functions of your application as a whole, never just in relation to one individual component of the system.
The installed is responsible for carrying out a risk assessment and installing correctly.
Avoid touching any electronic components.