England's Stove Works 25-PDVC, Installation & Operation Manual

Page: 4 / 77

IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
4
SPECIFICATIONS
Heating Specifications

Approximate Pellet Burn Rate**……1.0 to 1.8 kg/hr (2.2 to 3.8 lbs/hr)

Maximum Burn Time**………………………………………………..20 hours

Approximate Square Footage Heated***………………….up 2,000 sq. ft.

Hopper Capacity (fuel)………………………………………….…..40 pounds
EPA and Safety Compliance Specifications

EPA Compliance Status …………………. Certified to comply with 2020 particulate emission
standards using pellet fuel.

U.S. Test Standard: US EPA 40 CFR Part 60, Subpart 60.536

Particulate Emissions ……………………………………………… 1.430 grams/hr

CO Emissions …………………………………………………………. 0.0 grams/min

Efficiency………………………………………………………………… 68.4 % (HHV)

BTU rating ………………………………………………………………. 26,179 BTU/hr

Tested To UL 1482 ‐ 00, ASTM E 1509, ULC/ORD ‐ C1482 ‐ M1990 & ULC S627 ‐ 00
Notes for this unit: Product may vary slightly from diagram. Clearances are the minimum for
this unit and may need to be increased in the rear to have proper vent clearances. Follow all
venting manufacturer clearances and local codes.
*- As tested per ASTM 2779-10
** - Heat output, burn rate and maximum burn time are heavily dependent on the type of pellets burned in the stove; as such, these numbers may vary.
*** - The maximum heating capacity of this unit can vary greatly based on climate, construction style, insulation and a myriad of other factors. Use this
information in conjunction with a BTU loss calculation for your home to determine if this unit will be sufficient for your needs.