EnGenius EWS370AP User Manual Download Page 57

Page: 57 / 68

Speed Test Parameters / LED Control

This page allows you to implement speed test to realize

the throughput of a target DUT.

Target IP / Domain Name:

Enter an IP address or domain

name you wish to impelement a speed test for realizing
the variance on wireless speed.

Time Period:

Enter the time in seconds that you would like

the test to implement for and in how many intervals.

IPv4/IPv6 Port

: This Access Points uses IPv4 5001 and

IPv6 5002 port for the speed test.

Start

: Click start to implement speed test.

LED Control

Control LED on/off for Power, LAN interface, or 2.4 GHz/5
GHz WLAN interface.

Power:

Enables or disables the Power LED indicator.

LAN:

Enables or disables the LAN LED indicator.

WLAN-2.4 GHz:

Enables or disables the WLAN-2.4 GHz LED

indicator.

WLAN-5 GHz:

Enables or disables the WLAN-5 GHz LED

indicator.

Summary of Contents for EWS370AP





































































Search results

Summary of Contents for EWS370AP

Reviews:

Related manuals for EWS370AP

Brands by name

Popular brands

EnGenius EWS370AP, User Manual

Search results

Summary of Contents for EWS370AP

Reviews:

Related manuals for EWS370AP

Brands by name

Popular brands