21
To attach the AP on a wall
1.
Determine where the Access Point to be placed and mark
location on the surface for the two mounting holes. Use
the appropriate drill bit to drill two 8.1mm diagram and
26mm depth holes in the markings and hammer the bolts
into the openings.
2.
Screw the anchors into the holes until they are flush
with the wall.
3.
Screw the included screws into the anchors.
Summary of Contents for EWS370AP
