EnGenius EWS370AP, User Manual

Page: 18 / 68

18
1. Connect one end of the Ethernet cable into the 1st
LAN(PoE) port of the AP and the other end to the AP
Ethernet port on the PoE injector.
2. Connect the Power Adapter to the DC-IN port of the PoE
injector and plug the other end into an electrical outlet.
3. Connect the second Ethernet cable into the LAN port of
the PoE injector and the other end to the Ethernet port
on the computer.
4. Place the pane removed from step A back into the
device.
6. Screw on the provided antennas to the top of this device.
(EWS871AP only)
This diagram depicts the hardware configuration.
Note:
This Access Point supports both 802.3at PoE
(Power over Ethernet) or the included injector and
adapter. You may use either one as the power source.
Do not use both at the same time .
4
Hardware Installation
(EWS870AP/EWS871AP)
1
4
3
2