EnGenius ESR-9855G User Manual Download Page 36

Page: 36 / 126

This step requires that you configure the security features based on your needs. The following options are available.

BEST

– Select this option if your wireless adapters support WPA2

BETTER

– Select this option if your wireless adapters support WPA

GOOD

– Select this option if your wireless adapters do not support WPA, but support WEP instead

None

: Select this option if you do not want to activate any security features.

In order to protect your network from hackers and unauthorized users, it is highly recommended to secure the network using
encryption and authentication. Select a level of security and then click on the

Next

button to continue.

If you do not want to setup security, then select the

NONE

radio button.

5.1.2.1.

Wireless Security Level: BEST (WPA2)

Summary of Contents for ESR-9855G































































































































Search results

Summary of Contents for ESR-9855G

Reviews:

Related manuals for ESR-9855G

Brands by name

Popular brands

EnGenius ESR-9855G, User Manual

Search results

Summary of Contents for ESR-9855G

Reviews:

Related manuals for ESR-9855G

Brands by name

Popular brands