EnGenius ESR-9855G User Manual Download Page 91

Page: 91 / 126

Please wait while the system is rebooting.

Note

: Do not un-plug the device during this process as this may cause permanent damage.

6.4.2.3.

Restore To Factory Default

Click on the

Restore all Settings to Factory Defaults

button. This option restores al configuration settings back to the settings that were in

effect at the time when the device was shipped from the factory.

Once the dialog box appears, click on the

button to confirm the action.

Note

: The current settings will be lost.

Click on the

button to continue. You will then see the

Rebooting

page.

Please wait while the system is rebooting.

Note

: Do not un-plug the device during this process as this may cause permanent damage.

Summary of Contents for ESR-9855G































































































































Search results

Summary of Contents for ESR-9855G

Reviews:

Related manuals for ESR-9855G

Brands by name

Popular brands

EnGenius ESR-9855G, User Manual

Search results

Summary of Contents for ESR-9855G

Reviews:

Related manuals for ESR-9855G

Brands by name

Popular brands