EnGenius ESR-9855G User Manual Download Page 76

Page: 76 / 126

6.3.9. MAC Address Filter

This feature is used to restrict certain MAC address from accessing the Internet. These filters can be used for securing and restricting your
network.

Configure MAC Filtering

: Select one of the options from the drop-down list.

Turn MAC Filtering OFF:

When "OFF" is selected, MAC addresses are not used to control network access.

Turn MAC Filtering ON and ALLOW computers listed to access the network:

When "ALLOW" is selected, only computers with

MAC addresses listed in the MAC Filtering Rules list are granted network access.

Turn MAC Filtering ON and DENY computers listed to access the network:

When "DENY" is selected, any computer with a MAC

address listed in the MAC Filtering Rules list is refused access to the network.

MAC Address

: Specify that MAC address that you would like to filter.

Click on the

Save

button to store the changes.

Summary of Contents for ESR-9855G































































































































Search results

Summary of Contents for ESR-9855G

Reviews:

Related manuals for ESR-9855G

Brands by name

Popular brands

EnGenius ESR-9855G, User Manual

Search results

Summary of Contents for ESR-9855G

Reviews:

Related manuals for ESR-9855G

Brands by name

Popular brands