EnGenius ESR-9750G User Manual Download Page 136

Page: 136 / 176

Interface: If device is set to repeater mode, you can choose “Client” interface to

connect with other AP by using WPS, otherwise you may choose “AP”

interface to do WPS with other clients.

WPS via Push Button: Press the button to start the WPS process. The router

will wait for the WPS request from the wireless devices within 2 minutes.

WPS via PIN: You can fill-in the PIN code of the wireless device and press the

button to start the WPS process. The router will wait for the WPS request

from the wireless device within 2 minutes.

- Client List

This WLAN Client Table shows the Wireless client associate to this Wireless

Router.

Summary of Contents for ESR-9750G

















































































































































































Search results

Summary of Contents for ESR-9750G

Reviews:

Related manuals for ESR-9750G

Brands by name

Popular brands

EnGenius ESR-9750G, User Manual

Search results

Summary of Contents for ESR-9750G

Reviews:

Related manuals for ESR-9750G

Brands by name

Popular brands