EnGenius ESR-9750G, User Manual

Page: 57 / 176

57
Enable Port Mapping: Enable or disable port mapping function.
Description: description of this setting.
Local IP: This is the local IP of the server behind the NAT firewall.
Type: This is the protocol type to be forwarded. You can choose to forward
“TCP” or “UDP” packets only, or select “BOTH” to forward both “TCP” and
“UDP” packets.
Port Range: The range of ports to be forward to the private IP.
Add Port Mapping
Fill in the "Local IP", “Type”, “Port Range” and "Description" of the
setting to be added and then click "Add". Then this Port Mapping setting
will be added into the "Current Port Mapping Table" below. If you find any
typo before adding it and want to retype again, just click <Clear> and the
fields will be cleared.