EnGenius ESR-9750G, User Manual

Page: 40 / 176

40
N Data Rate: The “Data Rate” is the rate that this access point uses to transmit
data packets for N compliant wireless nodes. Highest to lowest data rate
can be fixed.
Channel Bandwidth: This is the range of frequencies that will be used.
Preamble Type: The “Long Preamble” can provide better wireless LAN
compatibility while the “Short Preamble” can provide better wireless LAN
performance.
CTS Protection: It is recommended to enable the protection mechanism. This
mechanism can decrease the rate of data collision between 802.11b and
802.11g wireless stations. When the protection mode is enabled, the
throughput of the AP will be a little lower due to a lot of frame-network that
is transmitted.
TX Power: This can be set to a bare minimum or maximum power.
- Security
This Access Point provides complete wireless LAN security functions,
included are WEP, IEEE 802.1x, IEEE 802.1x with WEP, WPA with pre-shared
key and WPA with RADIUS. With these security functions, you can prevent your
wireless LAN from illegal access. Please make sure your wireless stations use
the same security function, and are setup with the same security key.