EnGenius ENH500v3 User Manual Download Page 61

Page: 61 / 85

This page allows you to change the device username and
password. By default, the username is:

admin

and the

password is:

admin

. The password can contain from 0 to

12 alphanumeric characters and is case sensitive.After this
changes applies, you need to login again.

Account Settings

Administrator Username

: Enter a new username for

logging in to the New Name entry box.

Current Password:

Enter the old password for logging in

to the Old Password entry box.

New Password:

Enter the new password for logging in to

the New Password entry box.

Verify Password:

Re-enter the new password in the

Confirm Password entry box for confirmation.

Apply:

Click

Apply

to apply the changes.

Firmware Upgrade

This page allows you to upgrade the firmware of the
device.

To Perform the Firmware Upgrade:
1.

Click the

Choose File

button and navigate the OS file

system to the location of the upgrade file.

Select the upgrade file. The name of the file will appear
in the Upgrade File field.

Click the

Upload

button to commence the firmware

upgrade.

Note:

The device is unavailable during the Firmware

upgrade process and must restart when the upgrade is
completed. Any connections to or through the device
will be lost.

Account

Firmware

Summary of Contents for ENH500v3






















































































Search results

Summary of Contents for ENH500v3

Reviews:

Related manuals for ENH500v3

Brands by name

Popular brands

EnGenius ENH500v3, User Manual

Search results

Summary of Contents for ENH500v3

Reviews:

Related manuals for ENH500v3

Brands by name

Popular brands