EnGenius ECW230 User Manual Download Page 28

Page: 28 / 65

IPv4/IPv6 Settings

This page allows you to modify the device’s IP settings.

IP Network Settings:

Select whether the device IP address

will use a static IP address specified in the IP address field

or be obtained automatically when the device connects to
a DHCP server.

IP Address:

The IP address of this device.

Subnet Mask:

The IP Subnet mask of this device.

Gateway:

The Default Gateway of this device. Leave it

blank if you are unsure of this setting.

Primary/Secondary DNS:

The primary/secondary DNS

address for this device.

Save:

Click

Save

to confirm the changes.

Spanning Tree Protocol (STP) Settings

This page allows you to modify the Spanning Tree settings.
Enabling the Spanning Tree protocol will prevent network
loops in your LAN network.

Spanning Tree Status

: Enables or Disables the Spanning

Tree function. Default is Disable.

Hello Time

: Specifies Bridge Hello Time in seconds. This

value determines how often the device sends handshake
packets to communicate information about the topology
throughout the entire Bridged Local Area Network.

Max Age:

Specifies Bridge Max Age in seconds. If another

Basic

Summary of Contents for ECW230


































































Search results

Summary of Contents for ECW230

Reviews:

Related manuals for ECW230

Brands by name

Popular brands

EnGenius ECW230, User Manual

Search results

Summary of Contents for ECW230

Reviews:

Related manuals for ECW230

Brands by name

Popular brands