manualshive.com logo in svg

EnGenius EBC10v2, User Manual, Page: 52 / 167

Share
Download
EnGenius EBC10v2 User Manual Download Page 52

B

ASIC

 N

ETWORK

 S

ETTINGS

S

YSTEM

 S

ETUP

6-1

6.1 System Setup

6.1.1 Viewing System Status

The status page shows the summary of the current system status including system (hardware/software version, date/time), 
Internet connection (WAN), wired network (LAN) and wireless network (WLAN) information.

System

z

Model

  The model name of the EIR900.

z

Mode

  The router’s operating mode (AP / Router / WDS).

z

Uptime

  The amount of time the device has been active.

z

Current Date/Time

  The current system date and time.

z

Hardware Version

  The hardware version number of the 

EIR900.

z

Serial Number

  The serial number of the EIR900. The serial 

number is required for customer service or support.

z

Application Version

  The firmware version number of the  

EIR900.

Note:

To update the firmware visit www.engeniusnetworks.com.

Summary of Contents for EBC10v2








































































































































































Reviews:

No comments