EnGenius EBC10v2, User Manual, Page: 26 / 167

E
N
G
ENIUS
Q
UICK
S
TART
G
ETTING
S
TARTED
3-4
3.2 Getting Started
Setup Notes
When considering the placement of the EIR900 remember the following:
z
It must be located close to a DSL or Cable modem.
z
It must be close to an electrical outlet.
z
Upon first setup, it must be close to the computer that is used to set up and configure the router.
z
For optimal wireless access place the router in the center of the room, at a high altitude and with an unobstructed view
of the other wireless devices.
z
Other electronic devices can interfere with the wireless frequency of the router and reduce the wireless access range.
Accessing the Firmware
There are two ways to access the EIR900 configuration firmware: from a CD-ROM or a web browser.
Note:
Before getting started power off the cable or DSL modem.