manualshive.com logo in svg

EnGenius EBC10v2, User Manual, Page: 103 / 167

Share
Download
EnGenius EBC10v2 User Manual Download Page 103

B

ASIC

 N

ETWORK

 S

ETTINGS

P

ARENTAL

 C

ONTROL

 S

ETUP

6-52

6.5 Parental Control Setup

6.5.1 Configuring the Wizard

Parental Control is a feature that allows parents to filter out and control the Internet access. By adding keywords, the parental 
control engine checks web content and makes sure it does not contain specified content. Parents can also limit Internet 
access within a specified time period.

z

Add Policy

  Create a rule profile which describes the 

keyword filter and Internet access schedule. Policy 
rules can be applied to multiple users, which are 
known as the policy members. The parental control 
engine screens policy members based on the applied 
policy.

z

Policy Table

  Enable and disable a list of policy rules.

Click 

Apply

 to save the settings and continue.

Click 

Cancel

 to stop the setup.

To use the Wizard to create a policy rule, click 

Add Policy

 

and perform the instructions on the following screens.

Summary of Contents for EBC10v2








































































































































































Reviews:

No comments