manualshive.com logo in svg

EnGenius EBC10v2, User Manual, Page: 112 / 167

Share
Download
EnGenius EBC10v2 User Manual Download Page 112

B

ASIC

 N

ETWORK

 S

ETTINGS

V

IRTUAL

 P

RIVATE

 N

ETWORK

 S

ETUP

6-61

6.7 Virtual Private Network Setup

A Virtual Private Network (VPN) provides a secure connection between two remote locations or two users over the Internet. It 
provides authentication to securely encrypt data communicated between the two remote endpoints. The EIR900 supports up 
to 5 VPN tunnels, making it ideal for small-office and home-office (SOHO) users.

6.7.1 Viewing Status

View the status of currently configured VPN tunnels.

Note:

It is highly recommended to start with the Wizard to establish VPN tunnels. If you are an advanced user and 
would like to manually configure VPN Settings, select Profile Setting for advanced VPN setting.

z

No.

  The sequence number of the VPN tunnel.

z

Name

  The name of the VPN tunnel.

z

Type

  The type of VPN tunnel.

z

Gateway/Peer IP Address

  The VPN gateway or peer IP 

address.

Summary of Contents for EBC10v2








































































































































































Reviews:

No comments