Spanning Tree Settings
This page allows you to modify the Spanning Tree settings. Enabling the Spanning Tree protocol will prevent network loops in your
LAN network.
Status
: Enables or disables the Spanning Tree function.
Default is Disable.
Hello Time
: Specify Bridge Hello Time, in seconds. This value determines how often the device sends handshake packets to
communicate information about the topology throughout the entire Bridged Local Area Network.
Max Age
: Specify Bridge Max Age, in seconds. If another bridge in the spanning tree does not send a hello packet for a long period
of time, it is assumed to be inactive.
Forward Delay
: Specifies Bridge Forward Delay, in seconds. Forwarding Delay Time is the time spent in each of the Listening and
Learning states before the Forwarding state is entered. This delay is provided so that when a new bridge comes onto a busy
network, it analyzes data traffic before participating in the network.
Priority
: Specify the Priority Number. A smaller number has greater priority than a larger number.
Save
: Click
Save
to confirm the changes.
Summary of Contents for EAP1300 EXT
