●
The MCU chip has a build in Triple-Track Magnetic Stripe Head Interface (F2F
decoder)
3.5 Smart Card Reader (SCR)
PayPad allows payments with smart cards (chip cards). The MCU provides a full Smart
Card Reader interface including the analog front end and the smart card acceptor is
directly connected to the MCU.
●
Reading from and writing to ICC payment cards according to requirements for
payments
3.6 LED Display
PayPad features a 3.5 inch color display with bonded capacitive touch screen with cover
glass.
●
Display 3.5” with 320 x 480 resolution and 16 bit (color: 262k)
●
Power-saving Features to dim and shut off the display
●
Dimming of the display based on input from a lighting sensor
●
Co-existence with the NFC and Wifi antenna without disturbing each other
3.7 USB Interface
PayPad features an USB interface for charging and communication.
●
Charging with standard USB (5V - 500mA)
●
Charging with N4 5V charger for fast charging (5V - min. 1A)
●
Communication with MCU
3.8 Endurance & Environment Resistance
PayPad has a designed lifetime of XXX years at a small merchant location. This lifetime is
not under the scope of factory warranty.
●
Operation Environmental Temp: -10°C to + 45°C
●
Storage Temp.: -20°C to +60°C
●
Operating Humidity: 5% - 95% (non-condensing)
●
Device can be cleaned outer surface with moist cloth.
●
Max. Drop Resist.: 100cm to concrete floor
Confidential, no distribution
8
Summary of Contents for PayPad
Page 10: ...10...