E.
Magnetic Stripe Card
•
Select Magnetic Stripe Card payment option on the screen
•
[Picture place holder]
•
Firmly hold the card with the stripe facing towards the back of PayPad. Quickly
swipe the card through the reader from right side of the card to the left side.
•
[Picture place holder]
•
Wait until the transaction is finished with an indication on the display
•
[Picture place holder]
2.3 Charging & Power Supply
PayPad supports 3 kinds of power supplies: rechargeable Main Battery, Backup Battery
and USB charging capability.
If a charger is plugged then the main battery gets charged and the user could operate the
device but only In the case the charger delivers enough current for charging and operating.
If not enough current is delivered than only the main battery gets charged until a certain
level is reached and the user can operate the device again (switch to Active Mode).
If the Main Battery is dead (not chargeable anymore) then the device can operate with a
plugged charger (enough current needs to delivered from the charger).
Battery status is shown on the display as below:
[Picture place holder]
2.4 Security
PayPad is a payment device that fulfills the the security requirements for different
countries. For a complete list of countries, go to section Certifications & Compliance. Note
that PayPad is listed on the PCI-PTS Website and certified for PTS 4.x. Details to be found
online in the list.
It is strongly advised not to open the device when PayPad fails to operate in a
normal state. Please send the device to an official service site for repairing. Any
unauthorized repair will trigger anti-tempering switch and such device will be
invalidated.
Confidential, no distribution
6
Summary of Contents for PayPad
Page 10: ...10...
