2. Instructions
PayPad is designed to be usable when it is taken out of the box. There are no extra
assembly or installation steps needed. Simply take the device and follow the instruction
below for using it.
2.1 Power On/Off
Use Power Button for the following functions.
•
On/Off operation: hold the button for more than 2 seconds. This toggles the device
from absolute lower power consumption mode to operational mode.
•
Standby/Wake up: tap the button for less than 1 second. This toggles between active
mode and TFT Off mode or changes from PowerSave mode/Sleep mode to active
mode.
•
Reset: hold the button for more than 5 seconds. The device will be restarted by a
hardware reset.
2.2 Performing Payment Transaction
A.
Payment Transaction via Manual Amount Input
•
[Place holder]
B.
Payment Transaction via enfore Backend
•
[Place holder]
C.
Smart Card
•
Select Smart Card payment option on the screen
•
[Picture place holder]
•
Insert Smart Card into the Smart Card Reader port at the bottom of the device
with the chip facing upward
•
[Picture place holder]
•
Wait until the transaction is finished with an indication on the display
•
[Picture place holder]
D.
Contactless/NFC Card
•
Select Contactless/NFC payment option on the screen
•
[Picture place holder]
•
Place Contactless/NFC card above the device with approximately 2-3cm
distance to the display with the chip facing upward
•
[Picture place holder]
•
Wait until the transaction is finished with an indication on the display
•
[Picture place holder]
Confidential, no distribution
5
Summary of Contents for PayPad
Page 10: ...10...
