ENFORCER E-921APQ, Manual

Page: 4 / 8

ENFORCER Auto Dialer
4 SECO-LARM U.S.A., Inc.
Overview:
DC Power LED
Low Battery LED
LCD Display
Numeric Keypad
Mounting Points
Terminal Block
Reset Button
Battery Receptacle (Battery not included)
Siren Speaker
LINE Jack
DC Power Jack (for 3.5mm phone plug
adapter, not included)
Home Mode Button
LCD Screen Layout:
Front
Back (Covers Removed)
2015 2015 2015 2015- - - -01 01 01 01- - - -01 01 01 01 12 12 12 12- - - -0 0 0 00 0 0 0
PASSWORD PASSWORD PASSWORD PASSWORD MEMORY MEMORY MEMORY MEMORY LEARN LEARN LEARN LEARN
℡
℡ ℡
℡
CYCLE CYCLE CYCLE CYCLE ENTRY ENTRY ENTRY ENTRY
Siren Alarm
Auto Dial Time/Date
Call-Back Rings
ARM
ARM ARM
ARM
TRIGGER HOME TRIGGER HOME TRIGGER HOME TRIGGER HOME
Home Mode
Activated
Alarm Triggered
Left Side Right Side
Armed or
Disarmed
Note:
For explanation of these symbols, please see
Programming the Auto Dialer
on pages 6~9.
ENFORCER Auto Dialer
SECO-LARM U.S.A., Inc. 13
LED Strobe Light
SL-1301-BAQ
Door/Window Switches,
Magnetic Contacts, etc.
Voice Dialer
E-921CPQ
Shock/Vibration Detector
SS-040Q
Tamper Switch
SS-072Q
Photobeam Sensor
E-931-S35RRQ
Operating the Auto Dialer, continued:
Low-Battery (LOW BATT.) Indicator
When the charge level of the 9VDC backup battery (not included) is low, the “LOW BATT.” LED
will flash once every 1.5 seconds. Replace the battery in order to continue providing functionality
during a temporary disruption in power.
Note:
In order to avoid potential damage due to battery leakage, do not leave a low battery in
the unit. Also, be sure to remove the battery if the unit is unused for a period of time.
View Function
To view the last 5 sensor trigger events, while in standby mode press the [#/DOWN] button.
To view stored emergency telephone numbers, while in standby mode press the [*/UP] button.
Note:
After 10 seconds of inactivity, the dialer will automatically exit the view mode and return
to standby.
For a complete listing of SECO-LARM products, please visit us online at www.seco-larm.com.
Tips:
1. Make sure that the full telephone numbers have been stored as they would normally be dialed
from a local phone.
2. The auto dialer is only suitable for single phone lines. It is not compatible with fax machines.
3. Set the number of Call-in rings to be less than the voicemail or message answer point.
Also Available from SECO-LARM ® :