ENFORCER Auto Dialer
2
SECO-LARM U.S.A., Inc.
Features:
•
16-Digit large display with date/time and function icons
•
2 (N.C.) Triggers for multiple zone security
•
Remote monitoring – user can call in to listen in to room sounds and arm/disarm dialer
•
Remotely listen in to room sounds or disarm during call back
•
Programmable PIN number and entry delay timing
•
5 Programmable emergency telephone numbers (up to 32 digits each)
•
Programmable auto-dialing cycle repeat times
•
Home mode function (acts as a door chime when user is at home)
•
Panic button
•
Built-in flash memory to protect against system data loss in case of power failure
•
Touch-Tone dialing
•
Phone jack
•
Low-battery indicator for backup battery (battery not included)
•
DC power input jack (3.5mm phone jack, not included)
•
9V battery backup (battery not included)
•
Wall-mountable
•
Built-in 105dB alarm (with programmable alarm on/off)
•
Built-in auxiliary output for external alarm or siren
Table of Contents:
Features ......................................................... 2
Parts List ......................................................... 3
Specifications ................................................. 3
Wiring Diagram ............................................... 3
Overview ......................................................... 4
LCD Screen Layout ........................................ 4
Installing the Auto Dialer ................................. 5
Programming the Auto Dialer ..................... 6~9
Setting and Changing the PIN Number ...... 6
Setting Emergency Phone Numbers ...... 6~7
Deleting a Stored Phone Number ............... 7
Setting the Siren Function .......................... 7
Setting the Auto Dial Function .................... 8
Setting the Number of Auto Dial Cycles ..... 8
Setting the Number of Call-in Rings ........... 8
Setting the Entry Delay Time ...................... 9
Setting the Date and Time .......................... 9
Testing the Auto Dial Function ........................ 9
Resetting the Auto Dialer ................................ 9
Operating the Auto Dialer ....................... 10~13
Arming and Disarming the System ........... 10
Panic Button Use ...................................... 10
Remote Control by Telephone ............ 11~12
Home Mode Use ....................................... 12
Low-Battery Indicator ................................ 13
View Function ........................................... 13
Tips ............................................................... 13
Also Available from
SECO-LARM
®
........ 13
Program Planner ........................................... 14
Summary Programming/Operation Chart ..... 15
Troubleshooting ............................................ 16
ENFORCER Auto Dialer
SECO-LARM U.S.A., Inc.
15
Summary Programming/Operation Chart:
1.
Setting/Changing PIN Number (see pg. 6)
Current PIN [PROG] [ARM/DISARM] New PIN [ARM/DISARM] [PROG] x9
2.
Setting Emergency Phone Numbers (see pgs. 6~7)
PIN
[PROG]
x2
[ARM/DISARM]
[#/DOWN] or
[*/UP]
Enter Phone
Number
[ARM/DISARM]
[PROG]
x8
3.
Deleting a Stored Phone Number (see pg. 7)
PIN
[PROG]
x2
[ARM/DISARM]
[#/DOWN] or
[*/UP]
[DELETE/PAUSE] [ARM/DISARM]
[PROG]
x8
4.
Setting the Siren Function (see pg. 7)
PIN [PROG] x4 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x6
5.
Setting the Auto Dial Function (see pg. 8)
PIN [PROG] x5 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x5
6.
Setting the Number of Auto Dial Cycles (see pg. 8)
PIN [PROG] x6 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x4
7.
Setting the Number of Call-in Rings (see pg. 8)
PIN [PROG] x7 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x3
8.
Setting the Entry Delay Time (see pg. 9)
PIN [PROG] x8 [ARM/DISARM] [#/DOWN] or [*/UP] [ARM/DISARM] [PROG] x2
9.
Setting the Date/Time (see pg. 9)
PIN
[PROG]
x9
[ARM/DISARM]
[#/DOWN] or
[*/UP]
[ARM/DISARM]
Repeat for each
position
[PROG]
x2
10.
Test Auto Dial Function (see pg. 9)
(In Standby Mode) Press and Hold [PROG] [#/DOWN] or [*/UP] Check to see if number is dialed
11.
Arm/Disarm System (see pg. 10)
PIN
[ARM/DISARM]
12.
Remote Control by Telephone (see pgs. 11~12)
Receive Call
Press Key Code on Telephone Keypad
Dial Voice Dialer Number Press Key Code on Telephone Keypad
13.
Activate/Deactivate Home Mode (see pg. 12)
(In Standby Mode)
[HOME]
14.
View (see pg. 13)
Last 5 Sensor Trigger Records
(In Standby Mode) [#/DOWN]
Stored Emergency Telephone Numbers (In Standby Mode)
[*UP]
