ENFORCER Auto Dialer
10
SECO-LARM U.S.A., Inc.
Operating the Auto Dialer:
Arming and Disarming the System:
1.
To
arm the system
, enter the PIN number and press the [ARM/DISARM] button.
The dialer will sound three short “beeps” and the words “ARM” will appear on the LCD screen.
After 60 seconds, there will be a single “beep” tone to indicate that exit delay time has passed
and the alarm is now fully armed.
After the delay, when the system is fully armed, if a door or window connected to the alarm is
opened, the LCD screen will flash the word “TRIGGER”. After the adjustable entry delay time
has passed, the siren will begin to sound (30 seconds on and 30 seconds off) and auto dialing
will commence according to the programmed sequence and cycle times. The call receiver will
hear a single “beep” to indicate a sensor has been triggered or 4 “beeps” to indicate the
[PANIC] button has been pressed.
2.
To
disarm the system
, enter the PIN number and press the [ARM/DISARM] button.
The dialer will sound a long “beep” and the word “ARM” will disappear from the LCD screen.
Panic Button Use
1.
When the [PANIC] button is pressed, the siren will sound immediately and auto dialing will
commence without delay. If the siren has been programmed to “SOUND OFF” the siren will not
sound, but silent dialing will commence.
2.
To cancel the alarm and stop auto dialing, enter the PIN number and press the [ARM/DISARM]
button. The dialer is now disarmed.
Note:
When the siren has been programmed to “SOUND OFF,” the siren will not sound
and the dialing will commence silently after the delay time has passed. When the call is
answered, the receiver will hear single “beep” to indicate a sensor has been triggered or 4
“beeps” to indicate the [PANIC] button has been pressed.
Note:
If the auto dialer is not connected to a working telephone line, the dialer will “beep”
4 times and the siren will begin to sound without attempting to continue dialing out (this
overrides the “SOUND OFF” setting).
ENFORCER Auto Dialer
SECO-LARM U.S.A., Inc.
7
Deleting a Stored Phone Number
1.
Enter the PIN number and press the [PROG] button twice or until “MEMORY” flashes on the
LCD screen.
2.
Press the [ARM/DISARM] button to accept.
3.
Press the [#/DOWN] or [*/UP] button to select the number you wish to delete.
4.
Press the [DEL/PAUSE] button to delete the number.
5.
Press the [#/DOWN] or [*/UP] button to select other setup categories or press the [PROG]
button until the programming icons disappear to exit the setup mode.
Learn
This function is unused.
Setting the Siren Function
This setting allows the user to choose between an audible alarm when triggered, or a ‘silent alarm’
while dialing the emergency numbers. The factory default is “ON”.
1.
Enter the PIN number and press the [PROG] button four times or until the alarm icon
(
) flashes on the LCD screen.
2.
Press the [ARM/DISARM] button to accept. The dialer will “beep” once.
3.
Press the [#/DOWN] or [*/UP] button to select either “SOUND ON” or “SOUND OFF” and press
the [ARM/DISARM] button to accept.
4.
Press the [#/DOWN] or [*/UP] button to select other setup categories or press the [PROG]
button until the programming icons disappear to exit the setup mode.
Programming the Auto Dialer, continued:
Example 2
– To store a number with area code 1-949-555-1234, and an office extension #200
(where the PBX requires a 2-second pause before the extension): After scrolling to the desired
number location, enter ‘19495551234,’ press the [DEL/PAUSE] button for 2 seconds until the
letter ‘F’ appears on the LCD screen, press the [#/DOWN] button for 2 seconds until the ‘
┘
’
appears on the LCD screen, enter ‘200,’ and press the [ARM/DISARM] button.
Example 3
– To store a local number 555-2858: After scrolling to the desired number location,
enter ‘5552858’ and press the [ARM/DISARM] button.
5.
Repeat for the other numbers to be stored (up to 5 total).
6.
Press the [#/DOWN] or [*/UP] button to select other setup categories or press the [PROG]
button until the programming icons disappear to exit the setup mode.
Note:
If the dialer is programmed to call a voice pager service which requires operator assistance, the
service should be notified in advance regarding the meaning of the message. Consult local authorities
concerning the permissibility of automatically dialing their emergency numbers before programming.
