10
MODEL: EWC612-200A
USER’S MANUAL
NO.
DESCRIPTION
FONCTION
1
Terminal connection cable (-) with clamp (black)
To connect the charger to the battery (- terminal)
2
Terminal connection cable (+) with clamp (red)
To connect the charger to the battery (+ terminal)
3
Housing
Metal housing with louvres
4
110 V power plug
For connecting to a 110V mains socket
5
Transport wheels
For transporting the device
6
Inside Fan
For cooling the charging electronics
7
Display
For operating the device
8
Handle
For pushing the device
9
Full / LED green
Lights up once the connected battery is fully charged.
10
Charge / LED orange
Lights up during the charging process
11
Error / LED red
Lights up if the battery is connected incorrectly (reversed poles).
12
40 A / LED red
max. charging current: 6V: 40 A/ 12V: 40 A
For charging high-capacity batteries
(e.g. marine or large deep-cycle batteries) or to quick-charge medium capacity batteries.
13
12V/10A/LED red (max. charging current:10A
For charging medium capacity batteries (e.g. for lorries or tractors)
14
12V/2A/ LED red (max. charging current:2A)
For charging medium capacity batteries (e.g. for lawn tractors, snowmobiles or motorcycles)
15
GEL / LED red
For gel electrolyte batteries
16
AGM / LED red
For absorbed glass mat batteries
17
STD (Standard) / LED red
For batteries with liquid electrolyte (WET) and maintenance-free lead-acid batteries (MF)
18
BOOST 6 V / LED red (max. starting current: 100 A)
Helps start vehicles and equipment with weak batteries.
19
BOOST 12 V / LED red (max. starting current: 200 A)
Helps start vehicles and equipment with weak batteries.
20
Charge 12 V / LED blue
For charging 12 V batteries
21
Charge 6 V / LED blue
For charging 6 V batteries
22
Display
Shows the battery’s charging current or the charge condition.
23
START-STOP button to start or stop the selected charging function (indicated by LED)
24
SELECT RATE button for switching the charging current (indicated by LED)
25
SELECT TYPE button for switching the battery type (indicated by LED)
26
SELECT MODE button for switching the charging voltage (indicated by LED)
27
V / LED red
Charging voltage
28
% / LED red
Battery charge condition
29
SELECT DISPLAY button for switching the display
FUNCTIONS
The charger is equipped with a microprocessor (MCU - Micro Computer Unit) and features fully-automatic charging, diagnostic,
emergency and maintenance functions.
The “trickle charge” function allows the charger to be permanently connected. A full charge will be maintained.
Safety functions
The charger features the following safety features to prevent damage to the charger, the battery and the vehicle:
• Short circuit (defective battery)
• Incorrect connection (connected with reversed polarity)
• Sparking
• Overheating
• Excess current
• Overcharging
