Operation Instruction of BS Series Solar Pumping Inverter Installation and Wiring
21
2.5 Assemble DC Connector
2.5.1 Strip the cable 6-8mm,then connect the bare wire core into core tube of connector .
Figure 2-22 DC Line connects with wiring board
2.5.2 Crimp contact barrel by using a hex crimping die.Put the contact barrel with striped cable in
the corresponding crimping notch and crimp the contact.Insert the core tube into slot of connection
until hear the voice indicating in place.
Figure 2-23
2.5.3 Insert contact cable assembly into back of the male and female connector. tight nuts according
to the opposite direction. Now wiring is finished.
Figure 2-24
2.5.4 The PV importation that will assemble a good DC conjunction machine to make an effort to
insert Inverters carries and link OK after hearing the sound of "click".
