IMPAQ™
Owner’s Manual
AM-IMPAQ-OM
Rev AB October 2018
6
Specialty Charger Options List
Suffix
Description
C6
6’ of #12AWG AC Cord
C10
10' of #12AWG AC Cord
C12
12' of #12AWG AC Cord
L10
10
’ of DC cable
L13
13' of DC cable
L15
15' of DC cable
L18
18' of DC cable
L20
20' of DC cable
L25
25' of DC cable
L30
30' of DC cable
S
Series DC cable
Serial Number
This is the serial number that indicates complete information about the charger. It must be
supplied with the part number on any correspondence or discussion regarding this charger.
Battery Type
The chemical content construction of the battery this unit is designed to charge is given in this
part of the nameplate. (L-A = Lead Acid)
Max AH
This is the maximum amp-hours capacity of this cabinet.
No. Cells
This is the number of battery cells this unit will charge.
This number must match exactly with
any battery connected to the charger output.
Max Modules
This is the maximum number of modules the cabinet can hold.
Hertz
This gives the frequency in cycles per second of the AC input voltage. Under no conditions
operate the charger at a different frequency or from a generator with unstable frequency.
Phase
Number "3" indicates a Three Phase Charger and
“1” indicates a Single Phase Charger.
AC Volts
This is the nominal voltage this charger is rated for. The charger will only operate on this voltage.
Max AC Amps
This is the maximum AC Amps for which this cabinet is rated.
