IMPAQ™
Owner’s Manual
AM-IMPAQ-OM
Rev AB October 2018
19
End of Charge without Equalization
The green complete LED comes on after proper end of charge. The green complete LED is on
and the display shows AVAIL. The display alternates between:
Total charging time
Amp/hrs restored to the battery
L2 0 1 0 24-3 6 -48V U S11
Any other lit LED indicates a problem during charging. Please refer to paragraph
Control Panel
for more information.
If the battery remains plugged in and refresh charge has been enabled, refreshes will occur to
maintain an optimal charge.
The battery is now ready for use. Push the ON/OFF button before unplugging the battery.
End of Charge with Equalization
An Equalize charge can be started manually or automatically.
Manual Equalization Start
1. At the end of charge (green LED on or flashing), press on the <EQUALIZE> button. The
equalize button can also be pressed any time during the charge and an equalize charge
will be started after charging is complete.
NOTE:
When an Equalize is manually started, the output current will be set to the value
saved in the charger configuration.
2. The start of the equalization charge is indicated by the message
EQUAL
. During the
equalization charge, the charger displays the output current and alternates: the battery
voltage, voltage per cell and remaining time.
L2010 24-36-48V US11
3. The battery will be available when the green LED comes back on and the display shows
AVAIL.
4. The battery is now ready for use. If the battery remains plugged in and refresh charge
has been enabled, refreshes will occur to maintain an optimal charge. Push the ON/OFF
button before unplugging the battery.
Automatic Equalization Start
If an equalization day has been programmed in Charger configurations the equalization charge
will start automatically on the programmed day of the week after charging is complete.
NOTE:
The factory default IEI Equalize, 6 hour Equalize, Sunday at 00 hour.
The battery will be available when the green LED comes back on and the display shows AVAIL.
The battery is now ready for use. If the battery remains plugged in and refresh charge has been
enabled, refreshes will occur to maintain an optimal charge. Push the ON/OFF button before
unplugging the battery.
