background image

IMPAQ™

 

Owner’s Manual 

AM-IMPAQ-OM 

 

Rev AB October 2018

 

 

 

11 

GLOSSARY

 

 
Charging Profile 

The  charging  profile  defines  the  rate  of  current  charge  over  time.  The  charger  adapts  to  the 
battery’s  age  and  level  of  discharge.  Controlling  the  overcharge  coefficient,  whatever  the 
battery’s discharge level, reduces the amount of electricity consumed.  
 

Cold Storage Profile 

This is a charging profile that allows the configuration of the charger for use with batteries in cold 
storage application. The profile is an IEI (constant current, constant voltage, constant current) 
type with a number of user configurable parameters. 
 

Gel-Bloc Profile  

This  charging  profile  is  an  IEI  (constant  current,  constant  voltage,  constant  current)  charging 
profile designed for gelled electrolyte type sealed lead acid batteries. 
 

NXBLOC Profile 

This charging profile allows charging of NexSys TPPL bloc batteries at rates of 0.2 to 0.7 C

6.

 

 

NXSTND Profile 

This charging profile allows charging of NexSys 2V batteries at rates of 0.20 to 0.25 C

6

 

Opportunity Profile 

This charging profile is used when opportunity charging is desired. It includes a start rate of up 
to 25% of the battery’s 6-hour rated amp hour capacity and requires an equalize charge 
performed once a week. The weekly equalize charge can be programmed to run automatically. 
 
           

Operation 

During opportunity charging the user can charge the battery during breaks, lunch or any 
available time during the work day. The Opportunity Profile allows the battery to be 
safely charged while it is kept in a partial state of charge between 20% and 80% of the 
6-hour rated capacity during the work week. Sufficient time should be scheduled after 
the weekly equalize charge to check and maintain electrolyte levels and allow the 
battery to cool to ambient temperatures. 

 

Daily Charge 

When using the Opportunity Profile, the Daily Charge option can be set to add 
additional charging time every day if the work schedule allows. This option should be 
considered only when the daily work demand requires additional capacity. 
 

STD Flooded (IEI) Profile 

The profile is an IEI (constant current, constant voltage, constant current) type with a number of 
user configurable parameters. 
 

VRLA Profile 

This charging profile allows for valve regulated lead acid batteries to be charged. This charging 
profile is an IEIE (constant current, constant voltage, constant current, constant voltage) type. 
 

Summary of Contents for EI3-MR-5C










































Reviews: