EnerPro EPA1050, Installation And Operation Manual

Page: 53 / 58

EPA Series - Installation and Operation Manual
53 EnerPro Boiler-EPA Series- IOM
B- Condenser :
There are 2 opening on the condenser jacket of EPA units, one in front , you may have easily access to it by removing
the front panel, and one on the side ( Opposite to the exhaust) to have access to this you need to take the left part
of the casing out, (Refer to the exploded picture in Section3, by opening these 2 doors you will have access to the
condenser coils you may clean up by pressure washer and using a thin metal strip .
11.9 Cleaning the Burner head
1- Same as previous steps (5.8 A 1,2,3) Take of the cover and blower
2- Remove the adaptor and flange. ( Flame rod and ignition rod are assembled on the flange so move the flange
gently).
3- Tale the Burner head slowly, inspect it carefully for any damage ( Don’t use damaged or deformed burner head).
4- Clean the Burner head with pressure air.