EnerPro EPA1050, Installation And Operation Manual

Page: 32 / 58

EPA Series - Installation and Operation Manual
32 EnerPro Boiler-EPA Series- IOM
Step 2:
From the Configuration window, use the slide bar on the right had side and select the group by touching the group name.
Step 3:
Verify in correct group and view setting, determine the parameter in the group you wish to either view (confirm) or
change, if changes to a group parameter is needed, a service password will have to be entered.
Step 4:
Enter service password (Serial #) by touching the locked padlock icon near the top right hand corner, this will bring
you to the login screen enter service password (serial #). The locked padlock icon will change to an unlock padlock
icon and return back to the configuration menu, select the configuration group and then inside each group are specific
parameters.