ENERGYWALL.COM
INSTALLATION, OPERATION & MAINTENANCE MANUAL 717.814.5365
9
ENERGY WALL
TM
U-ERV/U-HRV
When mounted outdoors, an intake is required to eliminate water infiltration into the intake and exhaust ports
of the system. When an intake is required to be installed over a fan cube, it will have an acoustic liner. All
other intakes are unlined. Additional intake options with motorized dampers are available upon request.
Slide the intake hood over the fan cube (left) or
system flange (right) as shown below*
*1800 system shown for reference
Ensure the intake hood’s opening is flush with
the horizontal surface of the system as shown
Once the intake is in place, secure it to the system flanges using #14 x 1.25” long self-drilling screws on all 4
sides. A minimum of 2 screws must be used per unit (i.e. an 1800 system requires at least 6 screws per intake)
INSTALLATION
MECHANICAL
– INTAKES, VERTICAL MOUNT
Acoustic
(lined)
Intake
Standard
(unlined)
Intake
Summary of Contents for U-ERV 1200
Page 2: ......
