Energy Technology OCEM AUGIER DIAM4200 Series, Installation & Maintenance

Page: 18 / 56

6021642 DIAM4200 2.5 to 20KVA rev 1-9.docx
I-18
Warning:
WARNING is an indicative message, which does not change regulation and supply function in connection with
the load. (Except for mains warning)
If any warning have been detected, the following message(s) can be shown on the display:

If option “EFD” exists:
"No EFD" (interface EFD board not present or faulty)
“No HV (500V) EFD” (no injection voltage : measurement of earth leakage cannot be done)
“R Level EFD1” (A leakage has been detected, with a resistance value lower than the level 1).
“R Level EFD2” (A leakage has been detected, with a resistance value lower than the level 2).

If option “Burnt lamps” exists:
“Level 1 Burnt lamps” (The current number of burnt lamps is greater than level 1)
“Level 2 Burnt lamps” (The current number of burnt lamps is greater than level 2)
“Power drop” (if FAA selected : the load was cut more than 10%, in VA)

Mains power supply outside limits (Input voltage lower or greater than +/-10%)

Regulation outside limits (as “error regulation” programmed values)

"BAD Interface" message (control and monitoring board not present or faulty)
Fault:
ALARM represents a major fault of the CCR or due to an external event, which have stopped the CCR (in order
to protect itself or the lighting loop).
In case of fault or damage, the display shows that the CCR stopped and one or more faults have been detected.
The following message(s) are shown on the display:

Overcurrent Level 1 (after a trial to restart, the CCR cannot contain the output current which had reach
the 1
st
level as programmed)

Overcurrent Level 2 (ditto, for 2
nd
level)

Overcurrent Level 3 (ditto, for 3
rd
level)

Peak Overcurrent (ditto, for a 4
th
level, not configurable)

Open circuit (the CCR detected an output current lower and during a greater time than the programmed
parameters)
In order to re-start (after having fixed the fault), cancel the ALARM pressing the RESET key.