Preliminary
...the world's most energy friendly microcontrollers
2010-04-09 - t0005_1.10
34
www.energymicro.com
13 Debugging
The EFM32-G8XX-DK has an on-board debugger, and it can be used in different ways to debug the
EFM, both on and off kit. Below are descriptions on the different modes. Check the configuration chapter
to find out how to change the debug setting.
Table 13.1. Debug modes
Mode
Description
Debug MCU
In this mode the built-in debugger is connected to EFM on the BRD3300A.
Debug IN
In this mode the built-in debugger is disconnected, and an external debugger can be connected to
debug the EFM on the BRD3300A.
Debug OUT
In this mode the built-in debugger can be used to debug an EFM mounted in your own application.
electronic components distributor
