Energy micro EFM32-G8XX-DK, User Manual

Page: 22 / 70

Preliminary
...the world's most energy friendly microcontrollers
2010-04-09 - t0005_1.10 22
www.energymicro.com
Bit Name Reset Access Description
Value Mode Description
1 MICROSD The SPI CS is routed to the microSD
10.2.15 BC_RESET - Reset register
Offset Bit Position
0x01E
15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
RW RW
Name
EFM
FLASH
Bit Name Reset Access Description
15:2 Reserved
To ensure compatibility with future devices, always write bits to 0.
1 EFM 0 RW EFM reset signal
Set this bit to put the EFM into a reset state
0 FLASH 0 RW Flash reset signal
Set this bit to put the Nor flash into a reset state
10.2.16 BC_ADC_START - ADC start byte register
Offset Bit Position
0x020
15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0x00
Access
RW
Name
ADC_START
Bit Name Reset Access Description
15:8 Reserved
To ensure compatibility with future devices, always write bits to 0.
7:0 ADC_START 0x00 RW ADC start byte
Write this byte to start a conversion on the voltage monitor ADC. The content of the byte is equal to the start byte for the ADC itself.
10.2.17 BC_ADC_STATUS - ADC status register
Offset Bit Position
0x022
15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0
Access
R
Name
BUSY
Downloaded from Elcodis.com electronic components distributor