ENERGIE
Page | 41
21.
Appendix 2 – Hydraulic Schemes
IMPORTANT
: This drawing just shows the core parts and main
principle of the application, there are many parts can be installed such as
water pressure meters, water temperature meter, drainage etc.
21.1
Central heating/ cooling
The heat pump will heat the water, so that the water can be used for heating or
cooling. Normally, for heating the water is kept at 35 degrees for floor heating, 45
degrees for fan coil, 50 degrees for radiator, or other temperature at customer request.
For cooling, the water can be cold down to 12 degrees for fan coil.