1400W MITRE SAW ENB475MSW
ASSEMBLY
Note:
Before using the tool, read
the instruction book carefully.
WARNING:
To prevent the accidental starting
that could cause possible serious personal
injury, ALWAYS assemble all parts to your saw
BEFORE connecting it to the power supply. The saw
should NEVER be connected to a power supply
when you are assembling parts, making
adjustments, installing or removing blades, or when
not in use.
1. DUST EXTRACTION PORT (Fig. 1)
To reduce build up of saw dust and maintain top
efficiency of cutting, the saw dust collection can be
achieved by clipping a dust bag on the dust
extraction port.
A dust bag is provided for use on your mitre saw. To
install it, simply fit the dust bag over the extraction
port on the upper blade guard.
To empty the dust bag, remove it from the dust
exhaust port, open the dust bag by unzipping the
slide fastener.
NOTE:
To ensure optimal dust collecting, empty the
dust bag when it becomes filled to approximately
2/3 of its capacity.
2. SUPPORT STAND (Fig. 2-4)
Remove the screw (a) from support stand(18).
Insert ends of support stand into the holes in the
back of the base plate and screw in the screw on
support stand as shown in Fig.2,3 & 4.
WARNING:
Always assemble the support
stand when using the product.
3. MOUNTING HOLES (Fig. 5)
Before use, the saw can be fixed to a firm, level
surface with the 4 mounting bolts (Not supplied).
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
a
18
