14
EG-SMS PROGRAMMABLE POWER OUTLET STRIP
WITH GSM INTERFACE
All brands and logos are registered trademarks of their respective owners
SWITCH – response to the SWITCH command
ON /OFF – socket state for socket 1..4 respectively
POWER OK – power from power mains is present
Example SMS:
Gembird12001000001
Device action: switch Socket1 ON, Socket2 OFF, Socket3 OFF,
Socket4 ON, Gembird1 is password.
Response SMS:
SWITCH SOCKETS: ON OFF OFF ON, POWER OK
4.2 Using alarms by WATER, LOCKER, TEMPERATURE sensors
First, enable sensors needed by command Enable/Disable sensors.
For temperature alarm set the temperature limits, over which the alarm
will be issued. Time on device can be set on this command. It is not
necessary to set, it is needed for running the hardware schedule only,
which can be set by Power Manager software, see Clause 3.2 for details.
PASSWORD000A0B0C0DSLLLSHHHTTTTTTTT
A-TEMPERATURE sensor
B-LOCKER sensor
