62
EG-PMS2-WLAN PROGRAMMABLE WLAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
10. Troubleshooting
Problem
Solution
The rocker switch turns off.
The load connected to the device is too
high, some of the devices connected to the
EG-PMS2-WLAN should be disconnected
before the rocker switch can be turned on.
The switching command is
not carried out, the rocker
switch and indicators are not
lit.
There is no power supply to the EG-
PMS2-WLAN. Please, make sure the EG-
PMS2-WLAN is connected to the power
supply and the rocker switch is switched on.
The status of EG-PMS2-
WLAN in Power Manager does
not become
Connected
Maybe network settings problem. Try to
ping the device (see section 6.1 above)
EG-PMS2-WLAN
is
connected to local network
(ping test is ok) but not
responding.
Reset EG-PMS2-WLAN by pressing the
Reset button
on the side control panel (see
Figure #2 above) or switch it off and then on
again using the
Main rocker switch Z
(see
Figure #1 above).
Connection to EG-PMS2-
WLAN is lost. It seems
something is wrong with its IP
address.
Make
sure
EG-PMS2-WLAN
is
connected to WLAN and switched on.
Launch
LAN Find
utility. You can also try to
use
IP config (C)
button to let the device
renew its IP address (see section 3.2
above)
