12
EG-PMS2-WLAN PROGRAMMABLE WLAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
As soon as you turn the
Main rocker switch (Z)
on then the web
server,
Power manager
software or the hardware schedule will be able to
turn the manageable sockets on and off.
Master switch button (B)
(see Figure #2 above) can also switch all
the manageable sockets on and off regardless of their current status or
schedule that is being executed. To switch them on you should keep the
button pressed for 1-2 seconds. To switch them off you should keep the
button pressed for more than 3 seconds.
To protect the connected devices from possible high current and
short circuit EG-PMS2-WLAN is equipped with the automatic circuit
breaker.
NOTE:
If the total power consumption (or peak power) of the
devices, connected to EG-PMS2-WLAN exceeds 2500 Watts, the circuit
breaker may power EG-PMS2-WLAN off. In this case, please, remove
the excessive load first and then (after 2-3 minutes) press the main
rocker switch (Z) to restore the power supply (see Figure #3 above). To
be able to use EG-PMS2-WLAN you will now have to complete its WLAN
configuration.
3.2. Power Manager software installation
For EG-PMS2-WLAN to connect to your wireless router you should
configure it first. To do that, please, follow the steps below: