19
EG-PMS2-WLAN PROGRAMMABLE WLAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
After a successful login you will face the
EnerGenie
page (see section
4.2 below).
NOTE:
There is a possibility that you might then need to open the
LAN settings
page (see section 4.5 below) to complete the IP
configuration.
4.2. EnerGenie page
With the help of EnerGenie page (see Figure #8 below) you will be
able to see the status of all your four manageable sockets, and to switch
the sockets on and off manually. The status of your sockets, as well as
the buttons to switch them on/off are located at the top of the page.
NOTE:
the names of the sockets can be changed from the default
Socket1/Socket2/Socket3/Socket4 to something meaningful on the page
Socket Name Settings
(see section 4.4 below).
The EnerGenie page also allows you to setup access and
management (switch on and off) of your EG-PMS2-WLAN from anywhere
via Internet even if it does not have an external IP address. To setup this
free service you should follow two simple steps:
Register the device. To restrict access to the device via the
Internet to the rightful owner only, the device should be registered – e.g.
