50
EG-PMS2-WLAN PROGRAMMABLE WLAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
NOTE:
The hardware schedule keeps running even when the device
is powered off. However it is recommended not to power off the device
for longer than 1 week, because the built-in battery might get discharged
then. In this case the internal clock of the device would be reset and as
result some schedule events would not be executed. Besides all the
sockets would lose their previous status (they will be switched on). Leave
the device switched on for one day to fully charge the battery.
7.2. Setting up software schedule
Using the
Software schedule
button available from the Settings
window (see section 6.2 above) you can create the software timer
schedule (see Figure #27 below).
NOTE:
the software timer schedule will only be executed if the
managing computer is on and the Power Manager is launched.
